SWM16-KM | SWM Series UHF 16 Channels Wireless Microphone Karaoke Mixer System w/ Bluetooth, Metal Mixer, 2 Handheld Mics

The Sound Town SWM16-KM is a compact wireless microphone and karaoke mixer system. It comes with dual-channel, 8 selectable UHF frequencies per channel (16 channels in total) and is interference free. The receiver has one 3.5mm (1/8”) TRS input, one 3.5mm and 6.35mm (1/4”) TRS output connectors, plus built-in Bluetooth for easy setup with your home theater or speaker system. It works with a wide range of devices including phones, tablets, PCs, laptops, home receivers, speakers and etc.

The microphone receiver and sound mixer enable you to mix mic signal with music without using an additional mixer. It comes with two wireless microphones and can support two wired dynamic microphones (not included). The rotatory control knobs can swiftly adjust the volume of your music, microphone, echo and tone to the desired level. The built-in pop filter reduces potential popping sound and helps deliver consistent and superb sound quality. It’s ideal for karaoke, house parties, conferences, broadcasting, weddings, social events and any small to medium-sized venues such as meeting rooms, auditoriums, schools, churches and stages.

Setup Requirement: The wireless microphone system needs to be connected to a powered speaker (with 1/4" or XLR inputs) or an amplifier to work. These devices are sold separately.

• INTERFERENCE FREE: the wireless microphone system comes with Ultra-High Frequency (UHF, 550-590 MHz) which is less likely subject to interference from other equipment compared with a VHF system. It has 16 selectable frequencies (8 frequencies each channel) and is compliant with the latest FCC regulations
• TWO IN ONE: the wireless microphone receiver is also a sound mixer and equipped with rotatory controls which allow you to adjust echo, tone and volume of the mics
• EASY TO SET UP: the receiver has one 3.5mm (1/8”) TRS input, one 3.5mm and 6.35mm (1/4”) TRS output connectors for easy setup with your home theater or speaker system. It works with a wide range of devices including phones, tablets, PCs, laptops, home receivers, speakers and etc.
• SUPERB QUALITY: the built-in pop filter reduces potential popping sound and helps deliver consistent and superb sound quality. It’s ideal for conferences, broadcasting, weddings, karaoke, social events and any small to medium-sized venues such as meeting rooms, auditoriums, schools, churches and stages
• BUILT-IN BLUETOOTH: The built-in Bluetooth allows you to wirelessly pair from the music source device for optimal sound performance and coverage; Bluetooth 5.0 ensures immediate pairing and maintains a strong connection up to 100 feet.
• IMPORTANT: Please double check if your input device (say a phone or notebook) has the compatible output to connect to the microphone receiver. 

(1) SWM16-KM Receiver/Mixer
(1) Power Adapter
(2) Wireless Handheld Microphones
(1) 3.5mm (1/8”) to 3.5mm (Male to Male) Audio Cable
(1) 3.5mm to RCA (Male to Male) Audio Cable
(1) 6.35mm (1/4”) to 6.35mm (Male to Male) Audio Cable

If you are having trouble with your microphones, first we need to clarify which batch your microphone is.

BATCH 3: Single Button Microphone

---------------------------------------------------------------------

▶ If you have a dual button microphone, while the microphone is turned on and while pressing the set & power button simultaneously, do not let go until one of the following happens:

 
BATCH 2: The CHA or CHB blinks repeatedly. 

 
BATCH 1: The signal bar on the upper right corner of the microphone screen blinks repeatedly.

BATCH 1:

1. To change your microphone to a different channel:

• Turn off the microphone.
• Press the set & power button simultaneously.
• The power of the microphone should turn on automatically and the channel will change to either Channel A or Channel B.
• You will need to pair your receiver to the new microphone channel, please refer to instructions #2.

2. To pair your receiver to the microphone:

• Turn off the receiver.
• While the microphone is turned ON, press the set & power button simultaneously.
• While the pairing signal on the microphone LED display is still flashing, turn on the receiver.
• The light on the receiver should show blue/purple once it is connected correctly. If the light on the receiver is signaling red, it is not connected.

BATCH 2:

1. To pair your receiver to the microphone:

• Turn off the microphone and receiver.
• While the microphone is turned OFF, press the set & power button simultaneously. Do not let go until the pairing signal on the top-right of the microphone LED display begins to flash.
• While the pairing signal on the microphone LED display is still flashing, turn on the receiver.
• The light on the receiver should show blue/purple once it is connected correctly. If the light on the receiver is signaling red, it is not connected.

BATCH 3:

1. To pair your receiver to the microphone:

• Turn off the microphone and receiver.
• While the microphone is turned OFF, long-press the power button on the microphone and do not let go.
• When the display on the microphone flashes “1d”, immediately quick-press the power button on the microphone and then immediately release the power button. The microphone’s pairing signal on the top-right corner of the LED display will begin to flash.
• While the pairing signal on the microphone LED display is still flashing, turn on the receiver.
• The light on the receiver should show:
  SWM15-PRO: Blue/purple once it is connected correctly. If the light on the receiver is signaling red, it is not connected.
  SWM16-PRO: The RF1/RF2 light on the receiver should show green once it is connected correctly.

Specifications

Dimension & Weight

Warranty/Certifications